Jump to content

Welcome to Nissan GT-R Heritage
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Passenger occupancy sensor

- - - - -

  • Please log in to reply
105 replies to this topic

#101
Buschur Racing

Buschur Racing

    Stage 4 Member

  • Vendors
  • 2,358 posts
  • Joined 19-September 13
  • LocationWakeman, Ohio

If anyone is interested I have a factory occupancy sensor (the part that goes inside the seat) for the passenger side, I'll sell it for $50, it just plugs in and you are done.  Put it under your "race" seat on the floor.


  • choerizo and Gta88ws6 like this

www.buschurracing.com
 

BR160 package, stock turbofolds, 8.33@168.68 mph, E80 fuel.  

BR160 package, stock turbofolds, 8.74@160.08 mph, 93 octane.

Standing 1/2 mile 199.29 mph

 

COBB TUNING DEALER AND PRO TUNER

BUSCHUR RACING on FACEBOOK

BR SHOOTOUT on FACEBOOK


#102
changster

changster

    Stage 4 Member

  • OEM Member
  • 2,258 posts
  • Joined 26-January 13
  • LocationBay Area + Taipei
I just installed the airbag 360. It works perfectly.

However I'm surprised nobody has mentioned the fact now the seat belt light is on. It thinks someone is sitting on the passenger seat.

Anyway to get rid of that without buckling the passenger side seatbelt?

- 4.4 liter Alpha 12 built by TSM (R.I.P)
- 4.1 liter ER/ETS 6466 built myself with the help of everyone.

- 4.2 liter billet block <? big boy kit> coming.

 

13180940063_33e81c30d6_z.jpg


#103
7racer

7racer

    Stage 4 Member

  • OEM Member
  • 6,937 posts
  • Joined 24-March 13

I just installed the airbag 360. It works perfectly.

However I'm surprised nobody has mentioned the fact now the seat belt light is on. It thinks someone is sitting on the passenger seat.

Anyway to get rid of that without buckling the passenger side seatbelt?


I use that dummy plug that I posted a few post back...looks like a bottle opener on one side...

They are all over ebay
  • changster and elf_cruiser like this

In7anity!!


#104
Tay

Tay

    Stock

  • OEM Member
  • Pip
  • 25 posts
  • Joined 17-March 13

Sorry I just want to double confirm the summary of this stuff.

 

If you have a race seat on both driver's and passenger side:

- There are no more side airbags, and the resisters fool the car into thinking it's still there so the light doesn't blink.

- The Airbag 360 thing ENABLES all other airbags to keep working while you have race seats.

- With the Airbag 360 thing installed, you DON'T need the weight sensor anymore from a junk seat.

 

Correct?

 

 

I have a 2015, what resistor did you use to make it work? I have the 2.2ohm resistors and the POS but my light is still flashing. 

 

 

I'm also having a problem getting rid of my gauge cluster airbag light. I have an 09 with 2 race seats. The airbag 360 got rid of the light near the cd slot. I also added these 2 resistors to the plugs under driver and passenger seat, http://m.ebay.co.uk/...113?_mwBanner=1

We did the airbag reset using the ignition on off on technique. It goes off but comes back on after driving a few minutes.

Any suggestions to get it to stay off?

 

 

which airbag360 part# do we need for the Gtr, a 2015...?

 

 

Hey guys,

 

I just thought I would put everything in one place as I finally was able to get all the airbag lights to go off. Thanks to 7racer and David Buscher.

 

My car is a 2014 and initially I had the Airbag 360 unit and 2.2 ohm resistors in both the passenger and drivers side and I was still getting a light. I installed the side airbag cancel unit from Nengun in the drivers side and no more lights!

 

One of these for the passenger seat: http://airbag360.com...lator-472-p.asp

 

Two of the side airbag cancel units. One for the passenger and one for the drivers side (ignore the "Passenger Airbag Cancel"): https://www.nengun.c...-air-bag-cancel

 

And finally, two of these if you are using harness's and/or driving by yourself: http://www.ebay.com/...ONYONpk&vxp=mtr


  • destroid, 7racer and haul s like this

#105
7racer

7racer

    Stage 4 Member

  • OEM Member
  • 6,937 posts
  • Joined 24-March 13

Hey guys,

 

I just thought I would put everything in one place as I finally was able to get all the airbag lights to go off. Thanks to 7racer and David Buscher.

 

My car is a 2014 and initially I had the Airbag 360 unit and 2.2 ohm resistors in both the passenger and drivers side and I was still getting a light. I installed the side airbag cancel unit from Nengun in the drivers side and no more lights!

 

One of these for the passenger seat: http://airbag360.com...lator-472-p.asp

 

Two of the side airbag cancel units. One for the passenger and one for the drivers side (ignore the "Passenger Airbag Cancel"): https://www.nengun.c...-air-bag-cancel

 

And finally, two of these if you are using harness's and/or driving by yourself: http://www.ebay.com/...ONYONpk&vxp=mtr

 

nice! but holy hell those resistors are EXPENSIVE!


In7anity!!


#106
Tay

Tay

    Stock

  • OEM Member
  • Pip
  • 25 posts
  • Joined 17-March 13

nice! but holy hell those resistors are EXPENSIVE!

 

They are! But they do clip in nicely compared to using the 2.2 ohm resistors where you have to use electrical tape.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users