21 replies to this topic

[Doug@WGP]

We're moving to a new shop in Seattle, Washington on 3-1-16!  This will be our last sale in our Connecticut location!  We're going out with a bang though, and not the kind you get when your motor blows up!

 

The Shortblocks are Too Heavy to Lift into our Trailer Sale!

 

We've got a Built WGP Shortblock in stock that need to go!  It's on sale for $6000 plus shipping all month with NO CORES REQUIRED!  Specs are Skirt Coated 10:1 CP Pistons, Carrillo Rods, Fully Balanced and Blueprinted w/ new bearings, and ARP Mains.  If this one sells too fast and others want them, we'll sell identical ones to this one for $5000 plus a core fee all month long!

 

The Rent is Too Damn High Sale!

 

Since we're moving out ​and won't have to pay rent or any other bills for a while, that means we can lower the prices on the parts we sell!  If we don't have to receive it, unbox it, or install it on your car, you will pay the lowest prices on the forums (or anywhere else) for it this month!  Inbox me for quotes regardless of what it is!

 

The Last Chance Saloon Sale!

 

Historically, ​frontier towns would call themselves Last Chance Saloons because they were located  on the borders of areas where it was difficult to get Alcohol, kind of like how its hard to get E85 in Connecticut.  Because we're moving to a place where E85 is readily available... this is your last chance to get a WGP Dyno Tune in New England.  We'll tune your Flex Fuel GT-R for $0.75/WHP all month long, and have Cobb Accessports and EcuTek ProKits in stock and ready to go! 

 

The WYSIWYP Sale!

 

Seattle is the home of Microsoft, who was late to the party with the idea of  "What You See Is What You Get" ​editing behind IBM, HP, Xerox, and Apple.  We don't want to be late to anything so we've Pioneered "What You See is What You Pay!"  Order a Full Bolt on Kit (SBD700, etc.) from us and have us install it in the shop this month.  You'll pay us for the amount of time it takes to install the kit in REAL TIME.  For example, if it takes 7 hours, you'll pay 7 hours... and you can stick around and time us!  Don't worry, we only have one speed... GO!

 

The Parts We Make are Too Bulky to Fit in the Trailer Sale!

 

We've got some Driven Innovations Race Intercoolers in stock that need to go.  $4200 plus shipping all month!

 

The OK Some of The Parts Aren't That Bulky But We Still Don't Want to Pack Them Sale!

​​

All WGP Apex Brake Kits are On Sale This Month for $9000 complete! ​ All WGP Flex Fuel Kits are $450!

 

Last but not Least!!!...

 

The Help Us Pay for the New Shop Sale (Also known as the "Let's Say HI! to the Neighbors" Sale!) 

​​

​We've noticed that there isn't a GT-R specific shop in the Seattle Area​ (And no Cobb Pro-Tuner's who offer GT-R Support in the area either)  The Nearest Shops  on the Forum are ExtremeTurboSystems, English Racing, and Cobb in Portland, Oregon.  We're excited to open up the market in that area by doing the following:

 

1.  We'll install any ETS Turbo Kit at the new shop for the labor cost of the monthly rent at the new shop if you pre-book the build this month.

2.  We'll install any Cobb Product purchased from us this month at the new shop for NO CHARGE in the month of March! 

3.  We'll build any car for a client that will be capable of a 7 second ET pass for the multiple of the Sixty Foot Time x the quarter mile ET x the quarter mile trap speed in labor charges if you book the build with us this month to have the parts waiting and work performed after we move!  For example... if you run a 7.806@182.45mph with a 1.28 60ft (look familiar?), you'll pay $1822.98 in labor charges for the build!

 

Enjoy!!!

[achenator]

I always thought the idea behind you moving was to go someplace LESS liberal lol

[Doug@WGP]

I always thought the idea behind you moving was to go someplace LESS liberal lol

In this case it's to go somewhere where I can get a good paying job

[Tim]

Good luck on the move Doug

[ASHRAF]

You don't have a "Shipping to Saudi Arabia is so damn expensive, so I'll hook you up sale"

 

I'm interested in a DI intercooler and piping, what would it cost me to have that shipped to KSA?

 

-AJ

[Doug@WGP]

Inbox me the shipping address and I'll quote it!

[Doug@WGP]

One SBD700 Kit down for the WYSIWYP sale!  Let's book the next 3 weeks solid!!!

[Crazyrc]

Hey Doug. You keep ignoring my pm's so I'll post here. You said you'd buy me a set of heads to resolve selling me the junk 4.1 long block. Remember. The one you claimed had ETS CNC'd heads. We went through all this BS again before Sema and you promised you'd resolve it as soon as SEMA was over. I actually believed you and let you enjoy SEMA. I I've sent you 8 messages that you've chosen to ignore and delete. Shoot me a message so we can get this resolved.

[Doug@WGP]

Hey Doug. You keep ignoring my pm's so I'll post here. You said you'd buy me a set of heads to resolve selling me the junk 4.1 long block. Remember. The one you claimed had ETS CNC'd heads. We went through all this BS again before Sema and you promised you'd resolve it as soon as SEMA was over. I actually believed you and let you enjoy SEMA. I I've sent you 8 messages that you've chosen to ignore and delete. Shoot me a message so we can get this resolved.

Sorry but I'm not sending you anything. You ignored my requests to send me supporting documentation as to the nature of the failure, despite repeated attempts, and refused to return the "defective" parts to my shop for analysis, instead choosing to have a competitor perform the work on your car. All of this is in clear violation of our warranty agreement, which you had a copy of. I sent you components in good condition as evidenced by the photos and other documentation that were sent to you. What the 3 shops and tuners who worked on your car since then did to them is your problem and I have no interest in supporting someone who has repeatedly publicly degraded and threatened us, or in taking a shop at their word that can't even tighten some axle bolts on a high profile shop car.

Have a nice day.

[droptopp]

[Crazyrc]

You're not supporting anything Doug. You sold a 4.1 long block with documentation stating the engine was equipped with ETS CNC'd heads. Over and above all the other issues with this motor. They were in fact NOT CNC'd ETS heads. You lied. That's also commonly referred to as being fraudulent. We've had this discussion previously and you agreed to resolve it. We could have had this discussion via private message, but you chose to not to respond.

Edited by Crazyrc, 09 February 2016 - 10:52 AM.

[Doug@WGP]

You're not supporting anything Doug. You sold a 4.1 long block with documentation stating the engine was equipped with ETS CNC'd heads. Over and above all the other issues with this motor. They were in fact NOT CNC'd ETS heads. You lied. That's also commonly referred to as being fraudulent. We've had this discussion previously and you agreed to resolve it. We could have had this discussion via private message, but you chose to not to respond.

As asked before, send the original heads back to me for evaluation and I'll consider it. They bear identifying marks from my machine shop and us.

If you're not going to follow our procedures and choose to employ hacks to work on your car, then I can't help you. You expect us to give you thousands of dollars in parts when you can't give us a picture? This nonsense has gone on long enough. Your shops, your tuners, etc. were also unresponsive to my requests for information. The core you sent me as partial payment for said heads (and block) is a $5000 paperweight on my desk due to the same hack job work that your team performed on the engine I sold you... the difference is that I sent you and them the photos and other documents showing them their incompetence or negligence. If you want to talk about fraud you likely knew from day one that your core was a piece of junk and that's why you wanted a new engine in the first place... not to mention you told me it was an "AMS" engine.

I've got nothing else to add. You should either contact my lawyer (whose number I gave you) or your goon squad to take care of me like you originally threatened last year. (Copies of police report can be made public if you'd like)

I'm blocking you now. Like I said, have a nice day.

[Crazyrc]

You're a liar Doug. Plain and simple. You know the heads on my engine are not from ETS. You explicitly stated that they were.
You want me to pull the engine and send the heads back. Are you high, or just off your meds again?

[Crazyrc]

You haven't given me your lawyers number. Please attach it to a pm.

Edited by Crazyrc, 09 February 2016 - 11:47 AM.

[Crazyrc]

My goon squad? I live in Calgary, Canada. That's Western Canada Doug. Let's see the proof of my "goon squad" and police report please. You do a great job of derailing the conversation. Let's go back to the point. Once again. You sold me an engine with what you said were CNC'd ETS heads. Those heads were in fact not ETS. Confirmed by ETS themselves.

[Doug@WGP]

Confirmed before or after your installing shop started the engine without oil pressure not once but twice? Or confirmed before or after over a year and several half mile events passed? Or confirmed before or after it sat at Jacks for several months?

I'm not PMing you anything. I should invoice you for my time spent to continue this nonsense. I cost more than the lawyer lol.

[Crazyrc]

Even if any of your bogus claims were accurate, the heads you provided were not as described in terms of the sale.
You're making yourself look bad Doug. ETS CNC'd heads. You listed the engine for sale with those heads. The engine delivered did not have them. I can't explain this any slower to you. You were fraudulent. You even agreed to resolve this, but then for some reason have chosen to ignore it.
Send me your lawyers information.

[Doug@WGP]

Nope. I did no such thing, and I'm not going to respond again. You're the only person in our four year history to have ever claimed that we didn't deliver the correct parts, you're also the only person to have sent us a blown motor as a good core, and the only one who has threatened my life requiring police intervention.

Future attention you'll be getting from me: Zero.

[Crazyrc]

Your memory fails you my young hack. Wise you are not.

[Doug@WGP]

Your memory fails you my young hack. Wise you are not.

This was before you continued to harass me via PM. My insurance and attorney advised me not to deal with you or send you anything, and I agreed.